Ready to unleash your creative potential? Find answers to your questions about the new SINGER® MOMENTO™ craft cutting machine here. Jump to a specific section:. Q: What are the dimensions and weight of the machine?. Q: What comes in the box?. The mac
Heat presses from the SINGER® MOMENTO™ family will help you complete your creative process. To pick the one that's right for you, review FAQs in these categories:. Q: What are the dimensions of each heat plate?. Q: What comes in the box with each pre
Follow the instructions below to install or remove your SINGER® MOMENTO™ cutting blades. Pro Tip: If the blade does not light up, then it is not inserted properly. Check that the locking mechanism is properly aligned with the blade. NOTE: The Basic B
The SINGER® MOMENTO™ Rotary Blade is a powerful tool that can quickly and smoothly cut through a variety fabrics, fine materials, and delicate paper. Below are step-by-step instructions for replacing the blade in the rotary blade housing. For instruc
Using a pen with your SINGER momento™ craft cutting machine is a cinch. Here's everything you need to know.
SINGER® MOMENTO™ adhesive mats ensure that your cuts will be clean and precise. You can load your mat anytime during your project process before cutting. Pro Tip: Make sure not to place the middle pinch wheels over the mat sensor. If your machine wil
Camera calibration is an essential process to ensure precise positioning and accurate results when doing print-then-cut projects. By following these step-by-step instructions, you can easily calibrate the camera for optimal performance. Before you be
Matless cutting provides a convenient and efficient option for a variety of select materials. Materials that can be cut without a SINGER® MOMENTO™ mat include vinyl, heat transfer vinyl, and adhesive-backed materials. For a full list of materials tha
To operate your machine, ensure that it is connected to a power source and that it is turned on. The machine can be connected via USB or Wi-Fi. It is recommended to use Wi-Fi as the primary connection method. Follow the steps below to connect your ma
The pinchwheels on your SINGER momento™ will help your mat stay in place. Here's a few tips for using them. Pro Tip 1: The right hand pinch wheel must always be in contact with right hand side of the material or the cutting mat. The far-left hand pin
Getting to know the optimal force settings for your MOMENTO cutting machine is a little bit art and a little bit science. We'll help you get started with this easy guide.
