How do I thread my EPIC or Ruby 90?Updated 3 months ago

Your Husqvarna Viking EPIC Line Machine or Designer Ruby 90 is fast & easy to thread making sewing or embroidery thread changes a pleasure! 

Threading 

Make sure that the presser foot and needle are in the up position. 

Note: When using thread cones, place a cone holder on the spool pin before placing the thread cone. This prevents the thread cone from wobbling. Tip: When removing the thread cone from the spool pin, the cone holder might become stuck inside the thread cone. Push it out gently from the top.

Threading the Upper Thread

For most regular thread qualities and spool sizes, threading the upper thread from the main (left) spool pin in the vertical position is recommended for optimal sewing results. If you experience problems with the thread or sewing result, there are alternative ways to position the thread spool. 

1. Hold the telescopic thread guide by the markings and pull it straight up until it clicks into place. 2. Raise both spool pins to vertical position. Place the thread spool on the main spool pin (left). Using both hands, place the thread behind the left clip on the telescopic thread guide (A). The thread should run from right to left.

3. Hold the thread with two hands as illustrated. Floss the thread under the thread guide (B) from front to back. Pull thread back into and through threading slot (C). 

Note: Continue to hold the thread lightly next to the thread guide (B) throughout the threading process. This will create a bit of tension on the thread and ensure that the thread is properly seated in the threading path.

4. Pull the thread between the thread tension discs (D). Thread down through the right threading slot and then upwards through the left threading slot. Bring the thread from the right into the take-up lever (E) until it clicks into place (F), and down in the left threading slot to the last thread guide (G) just above the needle. 

5. Thread the needle using the automatic needle threader or manually. 

Before using the automatic needle threader, carefully read the instructions and recommendations